multi fuller plastic putty 400g

Description

Polyester putty with high flexibility dedicated to car body plastic panels repairs, in particular exposed for vibrations. Shows very adhesion to most types of plastic. Putty has properties of filling and finishing product.

Advantages

• Very good adhesion to plastics.
• Great flexibility.
• Good sanding properties.
• Very smooth surface after sanding.

Substrates

• The product has very good adhesion all outer car body parts made of plastic (PP, EPDM, ABS, PC, PPO, PA, RTPU, PBTP, PVC, PUR, PUR soft foam, UP-GF).
• The Surface should be wiped with non woven fabric, degreased with water and detergent ( do not use benzine based removers as they can melt plastic surfaces) then it should be washed again with water and detergent, rinsed and dried with air.
• Caution: Do not apply the putty directly on the wash primers, 1K acrylic and nitrocellulose products.

Use

Flexible polyester putty for plastic car body repairs.

Mixing ratio by weight

• Putty: 100
• Hardener: 2
• Stir thoroughly until achieving homogenous paste to not create air inclusions.

Layer thickness

• Putty can be applied in several thin coats. After each of them the product should dry through. Do not exceed the thickness of 3mm.
• Pot life is 3÷4 minutes at 20°C

Hardening time

• 25÷35 minutes at 20°C.
• Temperature below 20°C significantly increases the hardening time.

Sanding

• Coarse sanding (dry): P80÷P120,
• Finishing sanding (dry): P120÷P320.

Further work

• Polyester putties can be over coated with:
• 2K polyester spray fillers.
• 2K acryl fillers.
• 2K epoxy fillers.

General notes

• Excessive amounts of hardener will cause problems with bleaching of the top coat!
• The rooms should be well ventilated.
• Tools should be washed directly after application.
• Use personal protection equipment during the 2K products application. Protect
• eyes and respiratory system.

Caution: To maintain safety, always follow the instructions given in the MSDS for the products.