multi fuller soft extra putty 4.3kg

Description

Soft in work, filling polyester putty to medium and large holes. Very flexible and easy to sand. Creamy texture allows for good shaping.

Advantages

• Very easy sanding.
• Easy to mix and apply
• Appropriate hardness with good flexibility

Substrates

• The product has very good adhesion to various substrates. It can be applied over:
• Steel and aluminum after flatting and degreasing,
• Zinc coated steel after flatting and degreasing,
• Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers and existing coatings in good condition,
• We recommend sandpaper with gradations: P80-P120.

Caution: Do not apply the putty directly on the wash primers, 1K acrylic and nitrocellulose products.

Use

• Soft sanding polyester putty for car body repairs.

Mixing ratio by weight

• Putty: 100
• Hardener: 2
• Stir thoroughly until achieving homogenous paste to not create air inclusions.

Layer thickness

• Putty can be applied in several thin coats. After each of them the product should dry through. Do not exceed the thickness of 5mm.
• Pot life is 4÷7 minutes at 20°C

Hardening time

• 20÷30 minutes at 20°C.
• Temperature below 20°C significantly increases the hardening time.

Sanding

• Coarse sanding (dry): P80-P120,
• Finishing sanding (dry): P120-P320.

IR Drying

• 5-7 minutes of short waves, depending on the layer thickness and the type of radiator.
• Do not exceed the temperature of 60°C.
• Use as recommended by the equipment manufacturer.
• Wait about 5 min before the IR drying process.

Further work

• Polyester putties can be over coated with:
• 2K polyester putties.
• 2K polyester spray fillers.
• 2K acrylic fillers.
• 2K epoxy fillers

General notes

• Excessive amounts of hardener will cause problems with bleaching of the top coat!
• The rooms should be well ventilated.
• Tools should be washed directly after application.
• Use personal protection equipment during the 2K products application. Protect
• eyes and respiratory system.
• 
  

Caution: To maintain safety, always follow the instructions given in the MSDS for

the products.